Eleaf iStick 30w

Eleaf iStick 30w Kit – A 30 Watt Variable Voltage/ Variable Wattage device with a large OLED screen. Micro USB charging with passthrough capability – (4 Colours Choices)


Eleaf iStick 30w

The Eleaf iStick 30W is an upgraded version of the 20W iStick through expanding the range of output voltage and wattage. It has a fairly large capacity battery of 2200 mAh. The 30w iStick will now give you great performance between 2 Volts ~ 8 Volts or 5 Watts ~ 30 Watts. There is a newly introduced spring connector and it now  comes partnered with a wear-resistant stainless steel thread. It’s has a streamlined stainless steel protruding lip which makes the 30W iStick more suitable for larger tanks/atomisers that the previous 20W version would have had overhang on. The Eleaf iStick 30w can fire a coil with a resistance as low as 0.4 ohms, and all the way up to 5.0 ohms. It also now fires up to 30 watts which is 10 watts more than the older 20 watt model. The iStick 30W will therefore work with almost any tank that uses a coil lower than 30w.

This iStick features a very useful wattage lock feature. If you want to lock the wattage or voltage you are vaping at, you can do so by “holding down the UP and DOWN arrow buttons at the same time for approx. 3 seconds”, the screen will display the word “Locked” when done correctly. This means it will stay locked at the selected wattage and you won’t accidentally change the watts or volts when vaping or whilst in your pocket. The screen also has an improved accelerometer for faster scrolling up and down between wattages. Its really easy to switch between Wattage and Voltage modes, just click the fire button 3 times fast. To turn off the device fully hit the fire button 5 times fast in quick sucession.

The iStick 30W is to be charged with the supplied USB to Micro Usb cable, and with a USB plug with a Maximum of 1.5 Amps or less. Smartphone plugs are generally too strong and tend to give batteries a “false charge’ where the battery charges fast but also dies fast. The iStick 30w has pass-through charging technology, which means you can still vape whilst the battery is plugged in and charging. To charge the device fully it takes around 2 and a half hours. If you are vaping on and off at a lower wattage you can expect to get a couple of days worth of vaping with one full charge. However, if you are sub ohm vaping at 30W on 0.5ohm coils quite heavily, you can get through one charge in 4-5 hours. The battery life should last most MTL (Mouth to Lung) vaper’s 1 full day, but it will depend on your tank set-up and usage.

What’s in the Box ?

  • 1 x 30w iStick Battery (Choice of 4 Colour’s)
  • 1 x Micro Usb Charging Cable
  • 1 x Ego/510 Threading Adaptor
  • 1 x User Guide

*Please Note: As with most batteries we recommend not to use Smart Phone USB plugs to charge e-cigarette batteries as they are usually too powerful, they create a false charge where they charge the battery fast but the battery will then die very fast too ! Smart phone plugs usually put out aprox. 2.5 Amps, we recommend using USB plugs of 1 Amp, unless stated otherwise! Only a small very small selection of the very newest batteries have a 2.0 Amp Fast charge and they will usually promote it on the packaging.

Weight0.22 kg

Black, Blue, Rose Red, Silver

Battery Capacity


Battery Type

Built In – Internal

Hardware Brand



30 Watts

Battery Colour

Black, Blue, Rose Red, Silver

Pack Size

1 Battery & Cable

User Level

Intermediate, Starter

Scroll to Top